1967 Ferrari 365 GTB/4 Daytona Prototype by Scaglietti
Chassis No.
10287
Engine No.
251
Gearbox No.
757
Documents
Dutch Kentekenbewijs
-
-
-
-
BID
- The very first 365 GTB/4 Daytona prototype
- Fitted with a completely unique Tipo 243, 4,380 cc V-12 engine with six Weber carburetors from new
- Offered from twenty years of single-family ownership
- Painstakingly restored by Dutch-based Ferrari specialists
- Ferrari Classiche certified; retains its original chassis and completely unique engine
- Previously displayed at Museo Ferrari from 2015-2016
- Best of Show at the 2016 Concours d’Elegance Paleis Het Loo Apeldoorn
- An unrepeatable opportunity to acquire a unique piece of Ferrari history
In the late 1960s, it seemed as if the performance car world was at a crossroads. With the introduction of Lamborghini’s P400 Miura and its revolutionary mid-engined design, some thought this design would be the future for the upper echelons of performance cars, and that front-engined cars would begin to fade from popularity.
Spurred on by the success of the Miura, Ferrari knew that the replacement of the 275 GTB/4 needed to be something spectacular and new in order to take the fight to Lamborghini. Rather than move to a mid-engined format, it was decided that the front-engined V-12 platform would remain, alongside coachwork penned by Pininfarina. Quite simply, if it works for you and your clients, why go about reinventing the wheel? After all, this is what Ferrari had built their reputation on, and there was no one better at building twelve-cylinder, front-engined GT cars than Ferrari. They were not to be outdone by this team of renegades at Lamborghini, headquartered just down the road from Maranello!
Chassis number 10287 was the genesis of that new model of Ferraris and the Scuderia’s fighting back against the Lamborghini and the Miura. At first glance to the casual observer, the car offered here seems to tread the line between a 275 GTB/4 and a 365 GTB/4 Daytona. Visual cues to both can be seen and some design elements seem to have blended together, but this car is far more than a design study to determine Ferrari’s future. A total of six 365 GTB/4 prototypes would be built, but this example, as the first, remains the most recognizable, the most unique, the most significant, and is undoubtedly the most desirable.
Chassis number 10287 is that of a Tipo 596 chassis, the same type which was used for the 275 GTB/4, made of tubular steel and a wheelbase measuring 2,400 mm (a wheelbase length shared by both 275 GTB/4 and 365 GTB/4). At its heart is a completely unique Colombo engine, one that would not be seen in any other Ferrari road car at the time. Designated Tipo 243 internally, it is fitted with dry sump, three-valve heads rather than the usual four valves per cylinder, dual ignition, twin spark plugs per cylinder, and is topped with six Weber 40 DCN18 carburetors. The block itself is based on that of a 330 GT but has been bored out to 4,380 cc. What is worth noting about this completely unique and radically redesigned engine is that it bears similarities to the engines found in the 330 P4 prototype racers, the race car that won numerous races and earned its place in the history books after their memorable 1-2 finish with a 412 P coming in third at the 1967 24 Hours of Daytona. These racing cars also have double inlet valves with one exhaust valve per cylinder.
Aesthetically, the design in front of the windshield was similar to that of a 275 GTB/4, albeit with a slightly stretched and flattened nose, still boasting covered headlights and a bonnet with a central bulge similar to a 275 GTB/4. The shape of the tail section of the bodywork is instantly recognizable to anyone familiar with a Daytona, utilizing 275 GTB/4 boot hinges and a full-width rear chrome bumper. Chassis number 10287's side profile is most evocative of the production Daytona, and allegedly what Enzo Ferrari loved most about this particular prototype, featuring a near identical rear ¾ section and roofline. Looking at the nose and bonnet, similarities can be seen between this and Jaguar’s E-Type.
Once completed in early 1967, 10287 saw extensive factory testing at the Modena Autodrome over the course of that year. It was first registered on May 8, 1968, wearing Italian number plates ‘Roma B 85391’ through the official Ferrari dealer in Rome, Motor S.a.s. di Carla Allegretti e C, noting a sales price of 8,000,000 Italian Lira. It is interesting to note that, at the time, this was similar in price to a new 275 GTB/4, but by that time, the production version of the 365 GTB/4 Daytona had yet to be introduced, this being about five months before the 1968 Paris Auto Salon.
Chassis number 10287’s life outside of Ferrari began with Count Vincenzo Balestrieri, a Roman industrialist who found fame through his sporting exploits, especially offshore powerboat racing, winning the offshore powerboat racing world championships in 1968 and 1970, both around the time he would have owned chassis number 10287. He was the first non-American to win the world championship and also the first driver to win four consecutive races, achieving five speed records during this time. According to recollections from his son, Balestrieri had ordered a new 365 GTB/4 but before taking delivery, he found out through conversations with Enzo Ferrari that a spider version of the 365 GTB/4 was coming, which he much preferred. Rather than take delivery of his Daytona coupe, Enzo loaned him chassis number 10287 to enjoy while waiting for his Daytona Spider, and the prototype was traded back to Ferrari when the Daytona Spider arrived. All this is recorded in a feature article on chassis number 10287 in Cavallino 211.
The car’s report from Marcel Massini shows that chassis number 10287's first private owner was FIMA S.p.A in Rome, and that the next owner was Ganpaolo Salgarella of Bologna, who purchased the car from FIMA S.p.A in 1972. It did not remain with Salgarella for long and was exported from Italy to the United States in May of that same year. Chassis number 10287 passed through a handful of owners in the Southern United States before being purchased by Victor N. Goulet of Chicago, Illinois, in 1978. Later that year, the car was shown by Goulet at a Ferrari Club of America Central States event at Blackhawk Farms Raceway. Goulet moved to Southern California and took the Daytona with him. It was finally sold by Goulet in 1989 and returned to Europe under the ownership of a Dutch citizen who elected to keep the car in Switzerland. Chassis number 10287 was later sold to an Italian car dealer living in Switzerland. With him, the car was shown at several events, including the Grand Prix of Dionne-les-Bains in France in May 1993 and Ferrari Suisse’s 20th-Anniversary Meeting in St. Moritz.
In September 2003, the Daytona prototype was acquired by the father of the current owner and returned to the Netherlands. A quote from him included in Cavallino 211 neatly summarizes the condition of chassis number 10287 and his mentality at the time: “I came across this car in Switzerland. It was in a pretty sad state, but I managed to get it running and took part in a Ferrari Club Meeting in 2003. ‘Do you have any idea what this car is,’ some of the older club members asked me. ‘Well, it is something that needs an awful lot of work,’ I replied. But slowly I found out that it really was a very special car, and I became desperate to find out all of its history.”
Fascinated by 10287’s significant role within Ferrari, the owner decided that it should be fully restored and returned to its former glory. Great care was taken in researching and returning the car to exactly as it was when it left the factory. For this work, chassis 10287 was entrusted to a team of trusted specialists in the Netherlands with tremendous amounts of experience in Ferraris of this era. Alex Jansen of Forza Service was entrusted with the mechanical work. Bodywork was carried out by Carrosseriebedrijf Bart Romijnders, and interior work was left to HVL Exclusive Italian Interiors and Class Leathers.
Upon completion of 10287’s restoration, chassis number 10287 first showing was at the Villa d'Este Concorso d'Eleganza in May 2012. Once it returned to the public eye following the restoration, it received a tremendous amount of attention from aficionados and the motoring press alike, resulting in several feature articles in leading magazines, including issue 3 of the Dutch publication GTO by Autoweek, issue 303 in September 2014 of Rétro Viseur in France, its aforementioned article in Cavallino 211 in February/March 2016, AutoWeek Classics in the Netherlands in July 2016, and issue 23 of Octane Netherlands in August 2016.
Perhaps the final and most important step of the restoration was having the prototype Classiche certified. This proved to be an exciting and fascinating process as, during this time period, photographs of chassis number 10287 were found, showing that it had six small Carello taillights rather than the usual four seen on 365 GTB/4s. Through further research, it was determined that chassis number 10287 had left Maranello equipped as such, and the rear end of the car was returned to its as-completed state. Issued with a certification binder immediately thereafter, this confirms that the car retains its original chassis, completely unique and original engine, and has been fitted with a replacement transaxle gearbox of the correct type.
After this work was completed, the Daytona prototype was placed on display in the Museo Ferrari from February 2015 to March 2016, a great honor for a highly significant car. Undoubtedly, its crowning concours achievement came later that year when it was awarded Best of Show honors at the Concours d'Elegance Paleis Het Loo Apeldoorn in the Netherlands. Chassis number 10287 was shown twice more following its best of show win; at the Zoute Concours d'Elegance in 2017 and at MECC Maastricht Interclassics at a special exhibition...
View it on
Time, Location
Auction House
Chassis No.
10287
Engine No.
251
Gearbox No.
757
Documents
Dutch Kentekenbewijs
-
-
-
-
BID
- The very first 365 GTB/4 Daytona prototype
- Fitted with a completely unique Tipo 243, 4,380 cc V-12 engine with six Weber carburetors from new
- Offered from twenty years of single-family ownership
- Painstakingly restored by Dutch-based Ferrari specialists
- Ferrari Classiche certified; retains its original chassis and completely unique engine
- Previously displayed at Museo Ferrari from 2015-2016
- Best of Show at the 2016 Concours d’Elegance Paleis Het Loo Apeldoorn
- An unrepeatable opportunity to acquire a unique piece of Ferrari history
In the late 1960s, it seemed as if the performance car world was at a crossroads. With the introduction of Lamborghini’s P400 Miura and its revolutionary mid-engined design, some thought this design would be the future for the upper echelons of performance cars, and that front-engined cars would begin to fade from popularity.
Spurred on by the success of the Miura, Ferrari knew that the replacement of the 275 GTB/4 needed to be something spectacular and new in order to take the fight to Lamborghini. Rather than move to a mid-engined format, it was decided that the front-engined V-12 platform would remain, alongside coachwork penned by Pininfarina. Quite simply, if it works for you and your clients, why go about reinventing the wheel? After all, this is what Ferrari had built their reputation on, and there was no one better at building twelve-cylinder, front-engined GT cars than Ferrari. They were not to be outdone by this team of renegades at Lamborghini, headquartered just down the road from Maranello!
Chassis number 10287 was the genesis of that new model of Ferraris and the Scuderia’s fighting back against the Lamborghini and the Miura. At first glance to the casual observer, the car offered here seems to tread the line between a 275 GTB/4 and a 365 GTB/4 Daytona. Visual cues to both can be seen and some design elements seem to have blended together, but this car is far more than a design study to determine Ferrari’s future. A total of six 365 GTB/4 prototypes would be built, but this example, as the first, remains the most recognizable, the most unique, the most significant, and is undoubtedly the most desirable.
Chassis number 10287 is that of a Tipo 596 chassis, the same type which was used for the 275 GTB/4, made of tubular steel and a wheelbase measuring 2,400 mm (a wheelbase length shared by both 275 GTB/4 and 365 GTB/4). At its heart is a completely unique Colombo engine, one that would not be seen in any other Ferrari road car at the time. Designated Tipo 243 internally, it is fitted with dry sump, three-valve heads rather than the usual four valves per cylinder, dual ignition, twin spark plugs per cylinder, and is topped with six Weber 40 DCN18 carburetors. The block itself is based on that of a 330 GT but has been bored out to 4,380 cc. What is worth noting about this completely unique and radically redesigned engine is that it bears similarities to the engines found in the 330 P4 prototype racers, the race car that won numerous races and earned its place in the history books after their memorable 1-2 finish with a 412 P coming in third at the 1967 24 Hours of Daytona. These racing cars also have double inlet valves with one exhaust valve per cylinder.
Aesthetically, the design in front of the windshield was similar to that of a 275 GTB/4, albeit with a slightly stretched and flattened nose, still boasting covered headlights and a bonnet with a central bulge similar to a 275 GTB/4. The shape of the tail section of the bodywork is instantly recognizable to anyone familiar with a Daytona, utilizing 275 GTB/4 boot hinges and a full-width rear chrome bumper. Chassis number 10287's side profile is most evocative of the production Daytona, and allegedly what Enzo Ferrari loved most about this particular prototype, featuring a near identical rear ¾ section and roofline. Looking at the nose and bonnet, similarities can be seen between this and Jaguar’s E-Type.
Once completed in early 1967, 10287 saw extensive factory testing at the Modena Autodrome over the course of that year. It was first registered on May 8, 1968, wearing Italian number plates ‘Roma B 85391’ through the official Ferrari dealer in Rome, Motor S.a.s. di Carla Allegretti e C, noting a sales price of 8,000,000 Italian Lira. It is interesting to note that, at the time, this was similar in price to a new 275 GTB/4, but by that time, the production version of the 365 GTB/4 Daytona had yet to be introduced, this being about five months before the 1968 Paris Auto Salon.
Chassis number 10287’s life outside of Ferrari began with Count Vincenzo Balestrieri, a Roman industrialist who found fame through his sporting exploits, especially offshore powerboat racing, winning the offshore powerboat racing world championships in 1968 and 1970, both around the time he would have owned chassis number 10287. He was the first non-American to win the world championship and also the first driver to win four consecutive races, achieving five speed records during this time. According to recollections from his son, Balestrieri had ordered a new 365 GTB/4 but before taking delivery, he found out through conversations with Enzo Ferrari that a spider version of the 365 GTB/4 was coming, which he much preferred. Rather than take delivery of his Daytona coupe, Enzo loaned him chassis number 10287 to enjoy while waiting for his Daytona Spider, and the prototype was traded back to Ferrari when the Daytona Spider arrived. All this is recorded in a feature article on chassis number 10287 in Cavallino 211.
The car’s report from Marcel Massini shows that chassis number 10287's first private owner was FIMA S.p.A in Rome, and that the next owner was Ganpaolo Salgarella of Bologna, who purchased the car from FIMA S.p.A in 1972. It did not remain with Salgarella for long and was exported from Italy to the United States in May of that same year. Chassis number 10287 passed through a handful of owners in the Southern United States before being purchased by Victor N. Goulet of Chicago, Illinois, in 1978. Later that year, the car was shown by Goulet at a Ferrari Club of America Central States event at Blackhawk Farms Raceway. Goulet moved to Southern California and took the Daytona with him. It was finally sold by Goulet in 1989 and returned to Europe under the ownership of a Dutch citizen who elected to keep the car in Switzerland. Chassis number 10287 was later sold to an Italian car dealer living in Switzerland. With him, the car was shown at several events, including the Grand Prix of Dionne-les-Bains in France in May 1993 and Ferrari Suisse’s 20th-Anniversary Meeting in St. Moritz.
In September 2003, the Daytona prototype was acquired by the father of the current owner and returned to the Netherlands. A quote from him included in Cavallino 211 neatly summarizes the condition of chassis number 10287 and his mentality at the time: “I came across this car in Switzerland. It was in a pretty sad state, but I managed to get it running and took part in a Ferrari Club Meeting in 2003. ‘Do you have any idea what this car is,’ some of the older club members asked me. ‘Well, it is something that needs an awful lot of work,’ I replied. But slowly I found out that it really was a very special car, and I became desperate to find out all of its history.”
Fascinated by 10287’s significant role within Ferrari, the owner decided that it should be fully restored and returned to its former glory. Great care was taken in researching and returning the car to exactly as it was when it left the factory. For this work, chassis 10287 was entrusted to a team of trusted specialists in the Netherlands with tremendous amounts of experience in Ferraris of this era. Alex Jansen of Forza Service was entrusted with the mechanical work. Bodywork was carried out by Carrosseriebedrijf Bart Romijnders, and interior work was left to HVL Exclusive Italian Interiors and Class Leathers.
Upon completion of 10287’s restoration, chassis number 10287 first showing was at the Villa d'Este Concorso d'Eleganza in May 2012. Once it returned to the public eye following the restoration, it received a tremendous amount of attention from aficionados and the motoring press alike, resulting in several feature articles in leading magazines, including issue 3 of the Dutch publication GTO by Autoweek, issue 303 in September 2014 of Rétro Viseur in France, its aforementioned article in Cavallino 211 in February/March 2016, AutoWeek Classics in the Netherlands in July 2016, and issue 23 of Octane Netherlands in August 2016.
Perhaps the final and most important step of the restoration was having the prototype Classiche certified. This proved to be an exciting and fascinating process as, during this time period, photographs of chassis number 10287 were found, showing that it had six small Carello taillights rather than the usual four seen on 365 GTB/4s. Through further research, it was determined that chassis number 10287 had left Maranello equipped as such, and the rear end of the car was returned to its as-completed state. Issued with a certification binder immediately thereafter, this confirms that the car retains its original chassis, completely unique and original engine, and has been fitted with a replacement transaxle gearbox of the correct type.
After this work was completed, the Daytona prototype was placed on display in the Museo Ferrari from February 2015 to March 2016, a great honor for a highly significant car. Undoubtedly, its crowning concours achievement came later that year when it was awarded Best of Show honors at the Concours d'Elegance Paleis Het Loo Apeldoorn in the Netherlands. Chassis number 10287 was shown twice more following its best of show win; at the Zoute Concours d'Elegance in 2017 and at MECC Maastricht Interclassics at a special exhibition...
Time, Location
Auction House
