Search Price Results
Wish

LOT 38

ENIGMA I | A FULLY OPERATIONAL THREE-ROTOR ENIGMA I CIPHER MACHINE. BERLIN: HEIMSOETH UND RINKE, 1943

[ translate ]

ENIGMA I
A fully operational three-rotor Enigma I cipher machine. Berlin: Heimsoeth und Rinke, 1943

3-rotor Enigma I cipher machine, serial number 16421/JLA/43, complete with reflector and 3 bakelite rotors (I, II, and III) all with matching serial numbers (A6421), each rotor with 26 positions labeled with numbers, housed in the original oak case (13¼ x 11 x 6½ in.) with leather handle, case with hinged front panel stamped "Klappe Schleissen" opening to reveal bakelite Steckerbrett [plugboard]. Control panel with standard raised "QWERTZ" keyboard of 26 glass and metal keys with white on black backgrounds, light panel with letters A-Z and hinged rotor cover lifting to reveal 26 light bulbs, reflector & rotor compartment, and battery compartment, bakelite Steckerbrett (plug-board) and 10 patch-cables (8 plugged into Steckerbrett and 2 spares stored in lid of case), lid with green contrast filter, spare patch-cables, and instructions printed on metal plate ("Zur Beachtung!"). Some wear to components consistent with, and indicative of field use. [with] A circa 1934-1936 German Baumuster Type T1 Telegraph key, 4 blank, vintage "Schlüsselzettel Kriegsmarine" forms [The most common message form used by the German Navy], and 3 facsimile Enigma operating manuals. Schlüsselzettel forms folded and chipped.

A VERY FINE, FULLY OPERATIONAL 3-ROTOR ENIGMA I CIPHER MACHINE.

The Enigma I, often called the "Heeres" Enigma, was used by the German Heer (Army), the Luftwaffe (Air Force), and later, by the Kriegsmarine (Navy) before the introduction of the "M4" 4-rotor machine (see lot 37). The serial number 16421/JLA/43 of the present machine indicates that it was manufactured in 1943 by Chiffriermaschinen-Gesellschaft Heimsoeth und Rinke, (or ChiMaAG) a German cipher machine firm in operation from 1923-1945.

Patented in 1918 by Arthur Scherbius, a board member of ChiMaAG, the Enigma machine uses three electromechanical cipher wheels, each with 26 contacts at either side. The three rotors would be placed in pre-arranged positions, and the user would then type in a plain text message using the keyboard. The machine would encipher the message, and each corresponding encoded letter would light up on the light panel. The enciphered message would then be sent to the receiving party, usually via Morse code. The receiving party would then decipher the message, using another Enigma machine with the rotors set to the same position as the first. The rotors of all Enigmas were interchangeable, and indeed, rotors were swapped out very frequently.

The Enigma machine set a challenge that was answered by the remarkable team at Bletchley Park, whose achievements provide one of the most compelling stories of World War II. Breaking Enigma was the work of many, including Polish cryptographers who had already begun to decipher Enigma traffic before the war; naval forces who risked their lives capturing Enigma machines and code books; Alan Turing and other mathematicians with their revolutionary models for deciphering; Tommy Flowers and other mechanical geniuses who designed 'Colossus', the world's first programmable digital computer, at the GPO Research Centre at Dollis Hill in north west London; the hundreds of Wrens who operated the Bombes and, later, Colossus machines that made possible the daily decrypts. Their work saved countless lives and had an enormous impact on the submarine war in the Atlantic, the North African campaign, and the Normandy invasion; the work of Bletchley Park is often said to have shortened the war by two years. Furthermore, by coming to the understanding that to defeat Enigma it was necessary to mechanize much of the work of decryption, they helped to inaugurated the computer age.

PROVENANCE:
Private Norwegian Collection

Condition Report:
To request a condition report for this lot, please email science@sothebys.com.

[ translate ]

View it on
Sale price
Unlock
Estimate
Unlock
Time, Location
17 Dec 2019
USA, New York, NY
Auction House
Unlock

[ translate ]

ENIGMA I
A fully operational three-rotor Enigma I cipher machine. Berlin: Heimsoeth und Rinke, 1943

3-rotor Enigma I cipher machine, serial number 16421/JLA/43, complete with reflector and 3 bakelite rotors (I, II, and III) all with matching serial numbers (A6421), each rotor with 26 positions labeled with numbers, housed in the original oak case (13¼ x 11 x 6½ in.) with leather handle, case with hinged front panel stamped "Klappe Schleissen" opening to reveal bakelite Steckerbrett [plugboard]. Control panel with standard raised "QWERTZ" keyboard of 26 glass and metal keys with white on black backgrounds, light panel with letters A-Z and hinged rotor cover lifting to reveal 26 light bulbs, reflector & rotor compartment, and battery compartment, bakelite Steckerbrett (plug-board) and 10 patch-cables (8 plugged into Steckerbrett and 2 spares stored in lid of case), lid with green contrast filter, spare patch-cables, and instructions printed on metal plate ("Zur Beachtung!"). Some wear to components consistent with, and indicative of field use. [with] A circa 1934-1936 German Baumuster Type T1 Telegraph key, 4 blank, vintage "Schlüsselzettel Kriegsmarine" forms [The most common message form used by the German Navy], and 3 facsimile Enigma operating manuals. Schlüsselzettel forms folded and chipped.

A VERY FINE, FULLY OPERATIONAL 3-ROTOR ENIGMA I CIPHER MACHINE.

The Enigma I, often called the "Heeres" Enigma, was used by the German Heer (Army), the Luftwaffe (Air Force), and later, by the Kriegsmarine (Navy) before the introduction of the "M4" 4-rotor machine (see lot 37). The serial number 16421/JLA/43 of the present machine indicates that it was manufactured in 1943 by Chiffriermaschinen-Gesellschaft Heimsoeth und Rinke, (or ChiMaAG) a German cipher machine firm in operation from 1923-1945.

Patented in 1918 by Arthur Scherbius, a board member of ChiMaAG, the Enigma machine uses three electromechanical cipher wheels, each with 26 contacts at either side. The three rotors would be placed in pre-arranged positions, and the user would then type in a plain text message using the keyboard. The machine would encipher the message, and each corresponding encoded letter would light up on the light panel. The enciphered message would then be sent to the receiving party, usually via Morse code. The receiving party would then decipher the message, using another Enigma machine with the rotors set to the same position as the first. The rotors of all Enigmas were interchangeable, and indeed, rotors were swapped out very frequently.

The Enigma machine set a challenge that was answered by the remarkable team at Bletchley Park, whose achievements provide one of the most compelling stories of World War II. Breaking Enigma was the work of many, including Polish cryptographers who had already begun to decipher Enigma traffic before the war; naval forces who risked their lives capturing Enigma machines and code books; Alan Turing and other mathematicians with their revolutionary models for deciphering; Tommy Flowers and other mechanical geniuses who designed 'Colossus', the world's first programmable digital computer, at the GPO Research Centre at Dollis Hill in north west London; the hundreds of Wrens who operated the Bombes and, later, Colossus machines that made possible the daily decrypts. Their work saved countless lives and had an enormous impact on the submarine war in the Atlantic, the North African campaign, and the Normandy invasion; the work of Bletchley Park is often said to have shortened the war by two years. Furthermore, by coming to the understanding that to defeat Enigma it was necessary to mechanize much of the work of decryption, they helped to inaugurated the computer age.

PROVENANCE:
Private Norwegian Collection

Condition Report:
To request a condition report for this lot, please email science@sothebys.com.

[ translate ]
Sale price
Unlock
Estimate
Unlock
Time, Location
17 Dec 2019
USA, New York, NY
Auction House
Unlock