Technics - SU-8044K Solid state integrated amplifier, ST-S1 Tuner - Hi-fi set
In very good condition and fully refurbished Technics stereo amplifier. \r
The tuner is also working good. \r
The unit has been serviced by a professional enthusiastic whose main concern is to replace the parts with original ones not aftermarket components. If you looking for a long lasting unit this might be your chance for a beautiful unit. This repair comes to a cost. I have attached also all the repair pictures. \r
\r
All pictures are original of this lot and part of description so what you see is what you get. \r
\r
- Completely recaped with state of the art Japanese Capacitors from Japan. \r
- Cleaned all Pots and Switches. Cleaned the Flourescent Display. Soldered the whole PCB. \r
- I was able to get 56 Watts x 2 @ 8 ohms before clipping with 1 KHz sinewave input source. \r
\r
\r
SPECS SU-8044K: \r
\r
Power output: 38 watts per channel into 8Ω (stereo) \r
Frequency response: 10Hz to 50k. Hz\r
Total harmonic distortion: 0. 02%\r
Damping factor: 32\r
Input sensitivity: 2. 5m. V (MM) , 150m. V (line) \r
Signal to noise ratio: 70d. B (mic) , 80d. B (MM) , 97d. B (line) \r
Channel separation: 58d. B (line) \r
Output: 150m. V (line) , 30m. V (DIN) \r
Speaker load impedance: 4Ω to 16Ω\r
Dimensions: 430 x 142 x 255mm\r
\r
\r
SPECS ST-S1: \r
\r
Type: Mono/Stereo Tuner\r
Tuning Bands: FM, MW\r
Tuning Scale: Analogue\r
FM Tuning Range: 88 to 108 MHz\r
MW Tuning Range: 525 to 1605 k. Hz\r
Sensitivity: 1. 3u. V (FM) , 30u. V (MW) \r
Signal to Noise Ratio: 70d. B (FM) \r
Distortion: 0. 3% (FM) \r
Selectivity: 75d. B (FM) , 27d. B (MW) \r
Frequency response: 20Hz to 15k. Hz (FM) \r
Output: 300m. V\r
Dimensions: 430 x 142 x 251mm\r
Weight: 3. 8kg
View it on
Estimate
Time, Location
Auction House
In very good condition and fully refurbished Technics stereo amplifier. \r
The tuner is also working good. \r
The unit has been serviced by a professional enthusiastic whose main concern is to replace the parts with original ones not aftermarket components. If you looking for a long lasting unit this might be your chance for a beautiful unit. This repair comes to a cost. I have attached also all the repair pictures. \r
\r
All pictures are original of this lot and part of description so what you see is what you get. \r
\r
- Completely recaped with state of the art Japanese Capacitors from Japan. \r
- Cleaned all Pots and Switches. Cleaned the Flourescent Display. Soldered the whole PCB. \r
- I was able to get 56 Watts x 2 @ 8 ohms before clipping with 1 KHz sinewave input source. \r
\r
\r
SPECS SU-8044K: \r
\r
Power output: 38 watts per channel into 8Ω (stereo) \r
Frequency response: 10Hz to 50k. Hz\r
Total harmonic distortion: 0. 02%\r
Damping factor: 32\r
Input sensitivity: 2. 5m. V (MM) , 150m. V (line) \r
Signal to noise ratio: 70d. B (mic) , 80d. B (MM) , 97d. B (line) \r
Channel separation: 58d. B (line) \r
Output: 150m. V (line) , 30m. V (DIN) \r
Speaker load impedance: 4Ω to 16Ω\r
Dimensions: 430 x 142 x 255mm\r
\r
\r
SPECS ST-S1: \r
\r
Type: Mono/Stereo Tuner\r
Tuning Bands: FM, MW\r
Tuning Scale: Analogue\r
FM Tuning Range: 88 to 108 MHz\r
MW Tuning Range: 525 to 1605 k. Hz\r
Sensitivity: 1. 3u. V (FM) , 30u. V (MW) \r
Signal to Noise Ratio: 70d. B (FM) \r
Distortion: 0. 3% (FM) \r
Selectivity: 75d. B (FM) , 27d. B (MW) \r
Frequency response: 20Hz to 15k. Hz (FM) \r
Output: 300m. V\r
Dimensions: 430 x 142 x 251mm\r
Weight: 3. 8kg